Connecting pixracer with esp8266 Home › Forums › Tech Support › Connecting pixracer with esp8266 This topic contains 1 reply, has 2 voices, and was last updated by Bill B 4 years, 7 months ago. Author Posts September 12, 2016 at 8:01 am #603 Anonymous Hi, I have a pixracer with connected wifi module, What do I need to do to get the mavpilot talking to the pixracer? I’ve set the baud on serial 1 to 921600 but I’m stuck after that…. Any help greatly appreciated September 22, 2016 at 7:39 pm #604 Bill BKeymaster This one http://ardupilot.org/copter/docs/common-pixracer-overview.html I don’t have any specific setup instructions other than what is required to enable it here https://pixhawk.org/peripherals/8266 I do have a pixracer here. I pull it out and test that it works and what needs to be done. Author Posts You must be logged in to reply to this topic.