Connecting pixracer with esp8266 Home › Forums › Tech Support › Connecting pixracer with esp8266 This topic has 1 reply, 2 voices, and was last updated 8 years, 1 month ago by Bill B. Viewing 1 reply thread Author Posts September 12, 2016 at 08:01 #603 AnonymousInactive Hi, I have a pixracer with connected wifi module, What do I need to do to get the mavpilot talking to the pixracer? I’ve set the baud on serial 1 to 921600 but I’m stuck after that…. Any help greatly appreciated September 22, 2016 at 19:39 #604 Bill BKeymaster This one http://ardupilot.org/copter/docs/common-pixracer-overview.html I don’t have any specific setup instructions other than what is required to enable it here https://pixhawk.org/peripherals/8266 I do have a pixracer here. I pull it out and test that it works and what needs to be done. Author Posts Viewing 1 reply thread You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In Log in / Register